seamless steel pipe tr
Stainless Steel 316Ti Pipes and Tubes Specification Size (Seamless) : 1/2″ NB – 16″ NB Size (ERW) : 1/2″ NB – 24″ NB Size (EFW) : 6″ NB – 100″ NB Outside Diameter : 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock Thickness Range : 0.3mm...
Chat Now Stainless Steel 316Ti Pipes and Tubes Specification
Standards | Seamless | Welded |
ASTM | A312 / A213 / A269 | A312 / A269 / A358 / A249 / A409 / A778 |
Size (Seamless) : 1/2″ NB – 16″ NB
Size (ERW) : 1/2″ NB – 24″ NB
Size (EFW) : 6″ NB – 100″ NB
Outside Diameter : 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Length : Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded
Type : Seamless, ERW, Welded, Fabricated, CDW
Form : SS 316Ti Round Pipes/Tubes, SS 316Ti Square Pipes/Tubes, SS 316Ti Rectangular Pipe/Tubes, SS 316Ti Coiled Tubes, SS 316Ti “U” Shape, SS 316Ti Pan Cake Coils, SS 316Ti Hydraulic Tubes
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Stainless Steel TP 316Ti Pipes and Tubes Manufacturing Specifications
Spec. No. | Title | Scope |
ASTM A213 / ASME SA213 | Seamless Ferritic Stainless Steel and Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. | Pressure tubes, made from 16 grades of austenitic stainless steel |
ASTM A249 / ASME SA249 | Welded Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. | Pressure tubes, made from austenitic stainless steels |
ASTM A269 | Seamless and Welded Austenitic Stainless Steel Tubing for General Service. | 13 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. |
ASTM A270 | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing. | Austenitic stainless steel tubing intended for use in the diary and food industry in sizes up to and including 4 in. in outside diameter. |
ASTM A312 / ASME SA312 | Seamless and Welded Austenitic Stainless Steel Pipe. | Austenitic stainless steel pipe intended for high temperature and general corrosive service. 22 grades are covered. |
ASTM A358 / ASME SA358 | Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service. | For corrosion and high temperature service, normally not less than 8 in. nominal diameter. |
ASTM A376 / ASME SA376 | Seamless Austenitic Stainless Steel Pipe for High-Temp Central-Station Service. | Austenitic stainless steel pipe intended for high temperature and general corrosive service. Better surface than A312 pipe. |
ASTM A409 / ASME SA409 | Welded Large Outside Diameter Light Wall Austenitic Chromium-Nickel Alloy Steel Pipe for Corrosive or High Temperature Service. | Nominal diameter 14-30 in. in Schedules 5S and l0S. |
ASTM A511 | Seamless Stainless Steel Mechanical Tubing. | 27 grades are covered for mechanical applications. Primarily round tubing. |
ASTM A554 | Welded Stainless Steel Mechanical Tubing. | Nineteen grades are covered for mechanical applications. Rounds, squares, rectangles, and special shapes are included. |
ASTM A632 | Seamless and Welded Austenitic Stainless Steel Tubing for General Service. Small Diameter. | 9 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. |
AMS 5639 | Seamless Type 316Ti | Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability |
MIL-T-5695 | Tubing, Steel, Corrosion Resistant, (316Ti) Cold Drawn (1/2 or 1/4 Hard) Smls or W&D. | Intended for use in the fabrication of aircraft structural parts requiring a high degree of resistance to corrosion. |
A106 PIPE SPECIFICATIONS A/SA106 NPS 1/4″- 30″ ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit...
Chat NowA106 PIPE SPECIFICATIONS
A/SA106
NPS 1/4″- 30″
ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.
Scope
ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.
NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.
General Information
Orders for material under this specification should include the following, as required, to describe the desired material adequately:
Quantity | Feet, centimeters, or number of lengths |
Name of material | Seamless |
Grade | Grade A, Grade B, or Grade C |
Manufacture | Hot-finished or cold-drawn |
Size | NPS or Outside Diameter and Schedule Number of Average Wall Thickness |
Special outside diameter tolerance pipe | |
Inside diameter tolerance pipe, over 10 in ID | |
Length | Specific or random |
Supplementary requirements | |
Test Report Required | |
Specification designation | |
Hydrostatic test | |
Special requirements |
If you're satisfied with our astm-a106-seamless-pipe, welcome to place orders with us. As one of the best Seamless Steel Pipe manufacturers and suppliers in China, we have bulk hot sale products in stock at your choice. For detailed chemical composition and free sample, contact our factory now. Competitive price and good service are offered. Hot Tags: astm-a106-seamless-pipe, China, factory, suppliers, manufacturers, price, bulk, in stock, chemical composition, hot sale, free sample Read More
![<p>SA312 TP310HCB Heavy Stainless steel pipe supplier</p><p>SA312 TP310HCB Seamless pipes,SA312 TP310HCB Welded Stainless steel pipes</p><p><br />Supplier of ASTM SA312 Standard Specification for SA312 TP310HCB Seamless stainless steel pipes, SA312 TP310HCB Welded stainless steel pipes, and SA312 TP310HCB Heavily Cold Worked Austenitic Stainless Steel Pipes</p><p>1. Gangsteel produced and exported <strong>SA312 TP310HCB</strong> high quality Seamless stainless pipe,welded stainless steel pipe, heavily cold worked stainless pipes with the range of outer diameter 3.2-800mm, Wall thickness 0.25-50mm ,Supplier of The main Steel Grade is ASTM SA312 TP310HCB.</p><p>2. <strong>SA312 TP310HCB Stainless pipe</strong> referenced documents for production</p><p>A 262 Practices for Detecting Susceptibility to Intergranular Intergranular Attack in Austenitic Stainless Steels</p><p>A 370 Test Methods and Definitions for Mechanical Testing of Steel Products<br /> A 941 Terminology Relating to Steel, Stainless Steel, Related Alloys and Ferroalloys</p><p>A 1016/A 1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes</p><p>E 112 Test Methods for Determining Average Grain Size</p><p>E 381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings</p><p>E 527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)</p><p><strong>ANSI Standard SA312 TP310HCB Stainless pipe</strong></p><p>B1.20.1 Pipe Threads, General Purpose</p><p>B36.10 Welded and Seamless Wrought Steel Pipe</p><p>B36.19 Stainless Steel Pipe</p><p><strong>ASME Standard: SA312 TP310HCB Stainless pipe</strong></p><p>ASME Boiler and Pressure Vessel Code : Section VIII5</p><p>AWS Standard:</p><p>A5.9 Corrosion-Resisting Chromium and Chromium-</p><p>Nickel Steel Welding Rods and Electrodes6</p><p><strong>Other Standard: SA312 TP310HCB Stainless pipe</strong></p><p>SAE J1086 Practice for Numbering Metals and Alloys</p><p>3. <strong>SA312 TP310HCB </strong>Permitted Variations in Wall Thickness</p><p>Tolerance, % from Nominal</p><p>NPS Designator Over Under</p><p>1⁄8 to 21⁄2 incl., all t/ 20.0 12.5</p><p>Dratios</p><p>3 to 18 incl., t/D up to 5 %</p><p>incl. 22.5 12.5</p><p>3 to 18 incl., t/D > 5% 15.0 12.5</p><p>20 and larger, welded, all</p><p>t/D ratios 17.5 12.5</p><p>20 and larger, seamless,</p><p>t/D up to 5 % incl. 22.5 12.5</p><p>20 and larger, seamless,</p><p>t/D > 5% 15.0 12.5</p><p>where:</p><p>t = Nominal Wall Thickness</p><p>D = Ordered Outside Diameter</p><p>4. SA312 TP310HCB <strong>Stainless pipe</strong> Chemical Composition (Unit %)</p><table><tbody><tr><td><p>Grade</p></td><td><p>SA312 TP310HCB</p></td></tr><tr><td><p>UNS Grade</p></td><td><p>S31041</p></td></tr><tr><td><p>Carbon % Max</p></td><td><p>0.04-0.1</p></td></tr><tr><td><p>Manganese %</p></td><td><p>2.0</p></td></tr><tr><td><p>Phosphorus % Max</p></td><td><p>0.045</p></td></tr><tr><td><p>Sulfur % Max</p></td><td><p>0.030</p></td></tr><tr><td><p>Silicon % Max</p></td><td><p>1.00</p></td></tr><tr><td><p>Chromium %</p></td><td><p>24.00-26.00</p></td></tr><tr><td><p>Nickel %</p></td><td><p>19.00-22.00</p></td></tr><tr><td><p>Molybdenum %</p></td><td><p> Max 0.75</p></td></tr><tr><td><p>Titanium % Max</p></td><td><p>…</p></td></tr><tr><td><p>Columbium %</p></td><td><p>10*C-1.10</p></td></tr><tr><td><p>Tantalum max %</p></td><td><p>…</p></td></tr><tr><td><p>Nitrogen %</p></td><td><p>…</p></td></tr><tr><td><p>Vanadium %</p></td><td></td></tr><tr><td><p>Copper %</p></td><td></td></tr><tr><td><p>Cerium %</p></td><td></td></tr><tr><td><p>Boron %</p></td><td></td></tr></tbody></table><p>5. Mark of SA312 TP310HCB <strong>Stainless pipe</strong> Chemical elements</p><p>A New designation established in accordance with Practice E 527 and SAE J1086.</p><p>B Maximum, unless otherwise indicated. Where elipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.</p><p>C The method of analysis for nitrogen shall be a matter of agreement between the purchaser and manufacturer.</p><p>D For small diameter or thin walls or both, where many drawing passes are required, a carbon maximum of 0.040 % is necessary in grades TP304L and TP316L. Small outside diameter tubes are defined as those</p><p>less than 0.500 in. [12.7 mm] in outside diameter and light wall tubes as those less than 0.049 in. [1.20 mm] in average wall thickness (0.044 in. [1.10 mm] in minimum wall thickness).</p><p>E For welded TP316, TP316N, TP316LN, and TP316H pipe, the nickel range shall be 10.0–14.0 %.</p><p>F For welded pipe, the phosphorus maximum shall be 0.045 %.</p><p>G The titanium content shall be not less than five times the carbon content and not more than 0.70 %.</p><p>H The titanium content shall be not less than four times the carbon content and not more than 0.60 %.</p><p>I The columbium content shall be not less than ten times the carbon content and not more than 1.00 %.</p><p>J The columbium content shall be not less than eight times the carbon content and not more than 1.0 %.</p><p>K Grade S34751 shall have a columbium (niobium) plus tantalum content of not less than 15 times the carbon content.</p><p>6. SA312 TP310HCB Tensile and SA312 TP310HCB<strong>Stainless pipe</strong> Hardness Requirement</p><table><tbody><tr><td><p>Stainless Pipe Grade</p></td><td><p>SA312 TP310HCB</p></td></tr><tr><td><p>UNS Grade</p></td><td><p>S31041</p></td></tr><tr><td><p>Tensile Strength Mpa</p></td><td><p>515</p></td></tr><tr><td><p>Yield Strength Mpa</p></td><td><p>260</p></td></tr><tr><td><p>Elongation %</p></td><td><p>35</p></td></tr><tr><td><p>Hardness Brinell HBW max</p></td><td><p>219</p></td></tr><tr><td><p>Hardness Vickers HV max</p></td><td><p>230</p></td></tr><tr><td><p>Hardness Rockwell HRB max</p></td><td><p>95</p></td></tr></tbody></table><p>7. SA312 TP310HCB <strong>Stainless pipe</strong> Heat Treatment and Gain Size Requirement</p><table><tbody><tr><td><p>Stainless Pipe Grade</p></td><td><p>SA312 TP310HCB</p></td></tr><tr><td><p>UNS Number</p></td><td><p>S31041</p></td></tr><tr><td><p>Heat Treat Type</p></td><td><p>Solution Treatment</p></td></tr><tr><td><p>Solutioning Temperature</p></td><td><p>1900</p></td></tr><tr><td><p>Cooling Media</p></td><td><p>Water of rapid cool</p></td></tr></tbody></table><p>8. <strong>SA312 TP310HCB Stainless pipe </strong>Delivery time<br /> Gangsteel Factory produced them in 20days and we also had Stock list of 3000tons At TP321, TP316, TP316L,TP309S, TP310 and others.<br /> We can provide the package of each pipe to promise delivery condition by sea.</p><p><strong>9. SA312 TP310HCB Stainless pipe Payment Item: </strong></p><p>Delivery: 15 to 20 days according to your order quantity</p><p>Shipping: FCL,LCL,Buck ship</p><p>Loading Port: Shanghai,Tianjjin Port.</p><p>Packing: Wooden box,fixed with steel strip,then wrapped with woven bags</p><p>Payment terms: 30% T/T inadvance,70% balance after BL documents</p><p><strong>Our advantage:</strong></p><p>A. Annual production capacity:50,000 Mertic Ton</p><p>B. With at least100 tons stock for general specification</p><p>C. Quote within 12 hours</p><p>D. 1 hours drive to nearest seaport</p><p>E. Delivery maximum 10 days for stock</p><p>10. <strong>SA312 TP310HCB Stainless pipe</strong> Adopt Standard:</p><p> ASTM A213, ASME SA213<br /> ASTM A312, ASME SA312<br /> ASTM A269<br /> ASTM A511</p><p> ASTM A789</p><p> ASTM A790</p><p> EN10216-5<br /></p><p>We are specialized in welded stainless steel pipe factory to export high quality SA312 TP310HCB Stainless Steel Pipes. If you have any requirement for SA312 TP310HCB Or technical requirement about SA312 TP310HCB seamless stainless tubes, please feel free to contact us.</p>sp.infoImages of P235 Tr 1 Seamless Steel Tube](/public/images/steelplate/71.jpg)
SA312 TP310HCB Heavy Stainless steel pipe supplier
SA312 TP310HCB Seamless pipes,SA312 TP310HCB Welded Stainless steel pipes
Supplier of ASTM SA312 Standard Specification for SA312 TP310HCB Seamless stainless steel pipes, SA312 TP310HCB Welded stainless steel pipes, and SA312 TP310HCB Heavily Cold Worked Austenitic Stainless Steel Pipes
1. Gangsteel produced and exported SA312 TP310HCB high quality Seamless stainless pipe,welded stainless steel pipe, heavily cold worked stainless pipes with the range of outer diameter 3.2-800mm, Wall thickness 0.25-50mm ,Supplier of The main Steel Grade is ASTM SA312 TP310HCB.
2. SA312 TP310HCB Stainless pipe referenced documents for production
A 262 Practices for Detecting Susceptibility to Intergranular Intergranular Attack in Austenitic Stainless Steels
A 370 Test Methods and Definitions for Mechanical Testing of Steel Products
A 941 Terminology Relating to Steel, Stainless Steel, Related Alloys and Ferroalloys
A 1016/A 1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
E 112 Test Methods for Determining Average Grain Size
E 381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E 527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ANSI Standard SA312 TP310HCB Stainless pipe
B1.20.1 Pipe Threads, General Purpose
B36.10 Welded and Seamless Wrought Steel Pipe
B36.19 Stainless Steel Pipe
ASME Standard: SA312 TP310HCB Stainless pipe
ASME Boiler and Pressure Vessel Code : Section VIII5
AWS Standard:
A5.9 Corrosion-Resisting Chromium and Chromium-
Nickel Steel Welding Rods and Electrodes6
Other Standard: SA312 TP310HCB Stainless pipe
SAE J1086 Practice for Numbering Metals and Alloys
3. SA312 TP310HCB Permitted Variations in Wall Thickness
Tolerance, % from Nominal
NPS Designator Over Under
1⁄8 to 21⁄2 incl., all t/ 20.0 12.5
Dratios
3 to 18 incl., t/D up to 5 %
incl. 22.5 12.5
3 to 18 incl., t/D > 5% 15.0 12.5
20 and larger, welded, all
t/D ratios 17.5 12.5
20 and larger, seamless,
t/D up to 5 % incl. 22.5 12.5
20 and larger, seamless,
t/D > 5% 15.0 12.5
where:
t = Nominal Wall Thickness
D = Ordered Outside Diameter
4. SA312 TP310HCB Stainless pipe Chemical Composition (Unit %)
Supplier of ASTM SA312 Standard Specification for SA312 TP310HCB Seamless stainless steel pipes, SA312 TP310HCB Welded stainless steel pipes, and SA312 TP310HCB Heavily Cold Worked Austenitic Stainless Steel Pipes
A 941 Terminology Relating to Steel, Stainless Steel, Related Alloys and Ferroalloys
Grade | SA312 TP310HCB |
UNS Grade | S31041 |
Carbon % Max | 0.04-0.1 |
Manganese % | 2.0 |
Phosphorus % Max | 0.045 |
Sulfur % Max | 0.030 |
Silicon % Max | 1.00 |
Chromium % | 24.00-26.00 |
Nickel % | 19.00-22.00 |
Molybdenum % | Max 0.75 |
Titanium % Max | … |
Columbium % | 10*C-1.10 |
Tantalum max % | … |
Nitrogen % | … |
Vanadium % | |
Copper % | |
Cerium % | |
Boron % |
5. Mark of SA312 TP310HCB Stainless pipe Chemical elements
A New designation established in accordance with Practice E 527 and SAE J1086.
B Maximum, unless otherwise indicated. Where elipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
C The method of analysis for nitrogen shall be a matter of agreement between the purchaser and manufacturer.
D For small diameter or thin walls or both, where many drawing passes are required, a carbon maximum of 0.040 % is necessary in grades TP304L and TP316L. Small outside diameter tubes are defined as those
less than 0.500 in. [12.7 mm] in outside diameter and light wall tubes as those less than 0.049 in. [1.20 mm] in average wall thickness (0.044 in. [1.10 mm] in minimum wall thickness).
E For welded TP316, TP316N, TP316LN, and TP316H pipe, the nickel range shall be 10.0–14.0 %.
F For welded pipe, the phosphorus maximum shall be 0.045 %.
G The titanium content shall be not less than five times the carbon content and not more than 0.70 %.
H The titanium content shall be not less than four times the carbon content and not more than 0.60 %.
I The columbium content shall be not less than ten times the carbon content and not more than 1.00 %.
J The columbium content shall be not less than eight times the carbon content and not more than 1.0 %.
K Grade S34751 shall have a columbium (niobium) plus tantalum content of not less than 15 times the carbon content.
6. SA312 TP310HCB Tensile and SA312 TP310HCBStainless pipe Hardness Requirement
Stainless Pipe Grade | SA312 TP310HCB |
UNS Grade | S31041 |
Tensile Strength Mpa | 515 |
Yield Strength Mpa | 260 |
Elongation % | 35 |
Hardness Brinell HBW max | 219 |
Hardness Vickers HV max | 230 |
Hardness Rockwell HRB max | 95 |
7. SA312 TP310HCB Stainless pipe Heat Treatment and Gain Size Requirement
Stainless Pipe Grade | SA312 TP310HCB |
UNS Number | S31041 |
Heat Treat Type | Solution Treatment |
Solutioning Temperature | 1900 |
Cooling Media | Water of rapid cool |
8. SA312 TP310HCB Stainless pipe Delivery time
Gangsteel Factory produced them in 20days and we also had Stock list of 3000tons At TP321, TP316, TP316L,TP309S, TP310 and others.
We can provide the package of each pipe to promise delivery condition by sea.
9. SA312 TP310HCB Stainless pipe Payment Item:
Delivery: 15 to 20 days according to your order quantity
Shipping: FCL,LCL,Buck ship
Loading Port: Shanghai,Tianjjin Port.
Packing: Wooden box,fixed with steel strip,then wrapped with woven bags
Payment terms: 30% T/T inadvance,70% balance after BL documents
Our advantage:
A. Annual production capacity:50,000 Mertic Ton
B. With at least100 tons stock for general specification
C. Quote within 12 hours
D. 1 hours drive to nearest seaport
E. Delivery maximum 10 days for stock
10. SA312 TP310HCB Stainless pipe Adopt Standard:
ASTM A213, ASME SA213
ASTM A312, ASME SA312
ASTM A269
ASTM A511
ASTM A789
ASTM A790
EN10216-5
We are specialized in welded stainless steel pipe factory to export high quality SA312 TP310HCB Stainless Steel Pipes. If you have any requirement for SA312 TP310HCB Or technical requirement about SA312 TP310HCB seamless stainless tubes, please feel free to contact us.
sp.infoImages of P235 Tr 1 Seamless Steel TubeimagesChina ASTM A106 Gr.a P235 Gh Tr1 Seamless Steel Pipe Seamless Pipe,Seamless Stainless Steel Pipe,Seamless Carbon Steel Pipe manufacturer / supplier in China,offering ASTM A106 Gr.a P235 Gh Tr1 Seamless Steel Pipe,Carbon/Stainless Steel Pipe Fittings Concentric/Eccentric Reducer,RF/FF Thread Flange for High Pressure Pipeline and so on.
Read More
We are supplier of Seamless Steel 316L Pipes. We have in store for our clients a sturdy range of stainless steel pipes that are capacitance to withstand temperature variations and thus are used in heat transfer process equipment like boilers, super heaters, heat exchangers, condensers and...
Chat Now We are supplier of Seamless Steel 316L Pipes. We have in store for our clients a sturdy range of stainless steel pipes that are capacitance to withstand temperature variations and thus are used in heat transfer process equipment like boilers, super heaters, heat exchangers, condensers and similar applications. These stainless steel pipes can be customized depending upon their industrial usage.
Seamless, stainless pipe in sizes according to ANSI/ASME. Our ANSI/ASME stainless steel pipe is delivered in random lengths or cut to fixed lengths.
Seamless steel pipe often could be formed and produced through hot rolled craft and cold drawn technology. Certainly the strength of hot rolled seamless steel pipes rather than cold drawn seamless steel tubes. About its common uses respectively are
Steam pipeline,
Gas pipeline,
Liquefied gas pipeline,
Natural gas pipelines,
All kinds of pipelines for petroleum products,
Pipelines for conveying various other gases or liquids.
| UNS | ASTM | EN no. |
| S30403/S30400 | 304L/304 | 1.4306/1.4301 |
| S31603 / S31600 | 316L / 316 | 1.4404 / 1.4401 |
| S31803 / S32205 | - | 1.4462 |
| S32750 | - | 1.4410 |
| N08904 | - | 1.4539 |
| S31254 | - | 1.454 |
Application Of EN10217 Carbon Black Pipe 1)Petroleum,Gas,Chemical enterprise,superheater of boiler,heat exchanger EN 10217-1 (DIN 1626) seamed steel pressure pipes 1.0107 P 195 TR 1 St 33 195 320-440 27 1.0254 P 235 TR 1 St 37.0 235 360-500 25 1.0258 P 265 TR 1 ZH092 Hot-Rolled Seamless Steel Pipe; ASTM A106 Seamless Pressure Pipe;
Read More
Related searches for seamless steel pipe tr
seamless steel pipesstainless steel seamless pipesseamless steel pipe chinacarbon steel seamless pipesstainless steel seamless pipe sizesseamless stainless steel pipe manufacturersseamless steel pipe distributorstainless steel seamless pipe supplierSome results are removed in response to a notice of local law requirement.For more information,please see here.sp.info
A213 TP201 Seamless stainless tube,A213 TP201 Stainless pipe
ASTM A213 TP201Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Stainless Tubes, Stainless Pipe
1. Gangsteel produced and exported A213 TP201 high quality Seamless stainless pipe or Seamless stainless tube with the range of outer diameter 3.2-200mm, Wall thickness 0.5-12.7mm
The main Steel Grade is ASTM A213 TP201.
2. A213 TP201 Stainless pipereferenced documents for production
A 262 Practices for Detecting Susceptibility to Intergranular Intergranular Attack in Austenitic Stainless Steels
A 941 Terminology Relating to Steel, Stainless Steel, Related
Alloys and Ferroalloys
A 1016/A 1016M Specification for General Requirements
for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes
E 112 Test Methods for Determining Average Grain Size
3. A213 TP201 Stainless Surface Condition
Ferritic alloy cold-finished steel tubes shall be free of scale and suitable for inspection. A slight amount of oxidation is not considered scale.
A213 TP201 Ferritic alloy hot-finished steel tubes shall be free of loose scale and suitable for inspection.
A213 TP201 Stainless steel tubes shall be pickled free of scale. A213 TP201 When bright annealing is used, pickling is not necessary Any special finish requirement shall be subject to agreement between the supplier and the purchaser.
4. A213 TP201 Stainless pipeChemical Composition (Unit %)
Grade | A213 TP201 |
UNS Grade | S20100 |
Carbon % Max | 0.15 |
Manganese % | 5.5-7.5 |
Phosphorus % Max | 0.06 |
Sulfur % Max | 0.03 |
Silicon % Max | 1.00 |
Chromium % | 16.00-18.00 |
Nickel % | 3.5-5.5 |
Molybdenum % | … |
Nitrogen % Max | 0.25 |
Niobium % | … |
Titanium % | … |
Others Elements % | … |
5. Mark of A213 TP201 Stainless pipeChemical elements
AMaximum, unless a range or minimum is indicated. Where ellipses (...) appear in this table, there is no minimum and analysis for the element need not be determined or reported.
BThe method of analysis for Nitrogen shall be a matter of agreement between the purchaser and the producer.
CFor these alloys, there is no common grade designation. The UNS number uniquely identifies these alloys.
DFor small diameter or thin walls, or both, where many drawing passes are required, a carbon maximum of 0.040% is necessary in Grades TP304L, TP304LN, TP316L, and TP316LN.
EGrade TP347LN shall have an Nb content of not less than 15 times the carbon content.
FGrade TP348 shall have an Nb + Ta content of not less than 10 times the carbon content and not more than 1.10%.
GGrade TP348H shall have an Nb + Ta content of not less than 8 times the carbon content and not more than 1.10%.
HGrade TP444 shall have Ni + Cu = 1.00 max.
IGrade TP444 shall have Ti + Nb = 0.20 + 4(C + N)–0.80.
6. A213 TP201 Tensile and A213 TP201Stainless pipeHardness Requirement
Stainless Pipe Grade | A213 TP201 |
UNS Grade | S20100 |
Tensile Strength Mpa | 655 |
Yield Strength Mpa | 260 |
Elongation % | 35 |
Hardness Brinell HBW max | 219 |
Hardness Vickers HV max | 230 |
Hardness Rockwell HRB max | 95 |
7. A213 TP201 Stainless pipeHeat Treatment and Gain Size Requirement
Stainless Pipe Grade | A213 TP201 |
UNS Number | S20100 |
Heat Treat Type | Solution Treatment |
Solutioning Temperature | 1900 |
Cooling Media | Water of rapid cool |
8. A213 TP201Stainless pipe Delivery time
Gangsteel Facotry produced them in 20days and we also had Stock list of 3000tons At TP321, TP316, TP316L,TP309S, TP310 and others.
We can provide the package of each pipe to promise delivery condition by sea.
9. A213 TP201 Stainless pipe Payment Item:
TT and LC, or TT 30% advance payment.
10. A213 TP201Stainless pipeAdopt Standard:
ASTM A213, ASME SA213
ASTM A312, ASME SA312
ASTM A269
ASTM A511
ASTM A789
ASTM A790
EN10216-5
Our seamless stainless steel pipe and tube factory to export high quality A213 TP201Stainless Steel Pipes. If you have any requirement for A213 TP201 Or technical requirement about A213 TP201 seamless stainless tubes, please feel free to contact us.
Read More
Standard
API A106 GR.B A53 Gr.B seamless steel pipe /ASTM A106 Gr.B A53 Gr.B steel tube
AP175-79, DIN2I5L ,ASTM A106 Gr.B, ASTM A53 Gr.B,
ASTM A179/A192/A213/A210 /370WP91, WP11,WP22.
DIN17440, DIN2448,JISG3452-54.
Material
API5L,Gr.A&B, X42, X46, X52, X56, X60, X65, X70, X80,
ASTM A53Gr.A&B,ASTM A106 Gr.A&B, ASTM A135,
ASTM A252, ASTM A500, DIN1626, ISO559, ISO3183.1/2,
KS4602, GB/T911.1/2,SY/T5037, SY/T5040
STP410,STP42.
Certificates
API5L ISO 9001:2008 TUV SGS BV etc
Outside Diameter
1/2'--24'
21.3mm-609.6mm
Thickness
SCH5S, SCH10S, SCH20S,SCH20, SCH30,STD, SCH40,
SCH60, SCH80, SCH100, SCH140, SCH160,XS,
1.65mm-59.54mm
Length
5.8m 6m Fixed, 12m Fixed, 2-12m Random.
Technic
1/2'--6': hot piercing processing technic
6'--24' :hot extrusion processing technic
Surface Treatment
Black Painted, Galvanized, Natural, Anticorrosive 3PE coated,polyurethane foam Insulation .
Packing
Bundles or In bulk. bundled pipes with two slings at the both
end for easy loading and discharging,
End
Bevel end(>2"), Plain (≤2"),with plastic cap, with screwed and
socket.
Usage /Application
Oil pipe line, Drill pipe, Hydraulic pipe, Gas pipe, Fluid pipe,
Boiler pipe,Conduit pipe, Scaffolding pipe pharmaceutical and
ship building etc.
Chat Now
Steel plate/coil | Low Alloy steel plates offer cutting service |
Width(mm) | 600-25000mm |
Wall Thickness(mm) | 0.2-400mm |
Length(mm) | 600-12000mm |
Standard | API5L , ASTM A106 Gr.B, ASTM A53 Gr.B, |
Material | 20#,A53B, A106B, API 5L |
Surface | Black painting, varnish paint, anti rust oil, hot galvanized, cold galvanized, 3PE |
Certificates | API5L ISO 9001:2008 TUV SGS BV etc |
Packaging | Loose package, Packaged in bundles(3Ton Max) , bundled pipes with two slings at the both end for easy loading and discharging, End with Plastic caps or as per requirement |
Application | 1. Fluid pipe |
API 5L - Gr.B/X42/X46/X52,ASTM A106/A53/A179/A192
API 5L A106/A53 Gr. BA179/A192 X42 X52 St37 S52 Seamless Steel Pipe (Pipeline Pipe)
Standard | API A106 GR.B A53 Gr.B seamless steel pipe /ASTM A106 Gr.B A53 Gr.B steel tube AP175-79, DIN2I5L ,ASTM A106 Gr.B, ASTM A53 Gr.B, ASTM A179/A192/A213/A210 /370WP91, WP11,WP22. DIN17440, DIN2448,JISG3452-54. |
Material | API5L,Gr.A&B, X42, X46, X52, X56, X60, X65, X70, X80, ASTM A53Gr.A&B,ASTM A106 Gr.A&B, ASTM A135, ASTM A252, ASTM A500, DIN1626, ISO559, ISO3183.1/2, KS4602, GB/T911.1/2,SY/T5037, SY/T5040 STP410,STP42. |
Certificates | API5L ISO 9001:2008 TUV SGS BV etc |
Outside Diameter | 1/2'--24' |
21.3mm-609.6mm | |
Thickness | SCH5S, SCH10S, SCH20S,SCH20, SCH30,STD, SCH40, SCH60, SCH80, SCH100, SCH140, SCH160,XS, |
1.65mm-59.54mm | |
Length | 5.8m 6m Fixed, 12m Fixed, 2-12m Random. |
Technic | 1/2'--6': hot piercing processing technic |
6'--24' :hot extrusion processing technic | |
Surface Treatment | Black Painted, Galvanized, Natural, Anticorrosive 3PE coated,polyurethane foam Insulation . |
Packing | Bundles or In bulk. bundled pipes with two slings at the both end for easy loading and discharging, |
End | Bevel end(>2"), Plain (≤2"),with plastic cap, with screwed and socket. |
Usage /Application | Oil pipe line, Drill pipe, Hydraulic pipe, Gas pipe, Fluid pipe, Boiler pipe,Conduit pipe, Scaffolding pipe pharmaceutical and ship building etc. |
Chat Now
Steel plate/coil | Low Alloy steel plates offer cutting service |
Width(mm) | 600-25000mm |
Wall Thickness(mm) | 0.2-400mm |
Length(mm) | 600-12000mm |
Standard | API5L , ASTM A106 Gr.B, ASTM A53 Gr.B, |
Material | 20#,A53B, A106B, API 5L |
Surface | Black painting, varnish paint, anti rust oil, hot galvanized, cold galvanized, 3PE |
Certificates | API5L ISO 9001:2008 TUV SGS BV etc |
Packaging | Loose package, Packaged in bundles(3Ton Max) , bundled pipes with two slings at the both end for easy loading and discharging, End with Plastic caps or as per requirement |
Application | 1. Fluid pipe |
The product description
Chat Now The product description
| commodity | stainless steel seamless/welded pipe/tube |
| key words | stainless steel pipe/tube |
| OD | 8mm-630mm |
| Thickness | 1mm-50mm |
| Length | 1-8m or as customers required |
| Meterial | 201,202,304,304L,316,316L,310S,309S,321,301,310,410,420,430 |
| Brand | STEEL |
| Certification | SGS,BV,IQI,TUV,ISO,etc |
| Standard | ASTM,AISI,SUS,JIS,EN,DIN,GB, ASME,etc |
| Surface | No.1, 2B, BA, 8K Mirror, Hairline,satin, No.4,HL,CLmatt,pvc film,laser film. |
| Delivery time | 7-10 days after confirming the order |
| Application | Oil well pipe (casing, tubing and drill pipe, etc.), pipeline, boiler tube, mechanical structure pipe, hydraulic prop pipe, gas cylinder tube, geological tube, chemical pipe (high pressure chemical fertilizer pipe, oil cracking pipe) and ship pipe. |
| Advantages | The best product,the excellent quality,the most competitive price,the perfect service |
316 Stainless Steel Pipe has a unique material composition with additions of 0.08 Carbon, 0.75 Si, 2.0 Manganese, 0.03 Sulfur, 0.045 Phosphorous, 2.0-3.0 Molybdenum, chromium 16.0-18.0, Nickel 10.0-14.0, N 0.10 shows a min. tensile strength of 515 Mpa and a min. yield strength of 205 Mpa,...
Chat Now316 Stainless Steel Pipe has a unique material composition with additions of 0.08 Carbon, 0.75 Si, 2.0 Manganese, 0.03 Sulfur, 0.045 Phosphorous, 2.0-3.0 Molybdenum, chromium 16.0-18.0, Nickel 10.0-14.0, N 0.10 shows a min. tensile strength of 515 Mpa and a min. yield strength of 205 Mpa, hardness of 95 max for Rockwell B, hardness of 217 max for Brinell (HB ) and elongation min 40% in 50mm as per the mechanical properties.
316 – 316L SS Electropolished Pipes Specification
| Alloy 316 / 316L Specification | Stainless Steel 316 / 316L, 316 – 316L SS |
| SS UNS S31600 Pipe | 316 Stainless Steel Pipe |
| SS UNS S31603 Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| 316 – 316L Steel Welded Pipe Size | 5.0 mm – 1219.2 mm |
| UNS S31600/S3160 EFW Pipe size | 5.0 mm – 1219.2 mm |
| ASTM A312 Stainless Steel Pipe Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| TP316 SS Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| SS UNS S31600 Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| 316 Stainless Steel Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| 316L SS Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
| 316 SS Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| SS 316L Form | Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
| Stainless Steel 316 / 316L Type | Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
| 316L SS End | Plain End, Beveled End, Treaded Pipe |
| SS UNS S31603 Marking | All 316 SS Pipe are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| SS 316 Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| 316 – 316L SS Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| SS GOST 03Ch17N14M3 Specialize in | 316 – 316L Stainless Steel Large Diameter Pipe Alloy 316 / 316L Capillary Tube Stainless Steel 316 Heat Exchanger & Stainless Steel 316L Condenser Tube |
| Stainless Steel 316 Test Certificate | Manufacturer Test Certificate |
If you're satisfied with our stainless-pipes-316l-pipe, welcome to place orders with us. As one of the best Stainless Pipes manufacturers and suppliers in China, we have bulk hot sale products in stock at your choice. For detailed chemical composition and free sample, contact our factory now. Competitive price and good service are offered. Hot Tags: stainless-pipes-316l-pipe, China, factory, suppliers, manufacturers, price, bulk, in stock, chemical composition, hot sale, free sample Read More
Standard
API A106 GR.B A53 Gr.B seamless steel pipe /ASTM A106 Gr.B A53 Gr.B steel tube
AP175-79, DIN2I5L ,ASTM A106 Gr.B, ASTM A53 Gr.B,
ASTM A179/A192/A213/A210 /370WP91, WP11,WP22.
DIN17440, DIN2448,JISG3452-54.
Material
API5L,Gr.A&B, X42, X46, X52, X56, X60, X65, X70, X80,
ASTM A53Gr.A&B,ASTM A106 Gr.A&B, ASTM A135,
ASTM A252, ASTM A500, DIN1626, ISO559, ISO3183.1/2,
KS4602, GB/T911.1/2,SY/T5037, SY/T5040
STP410,STP42.
Certificates
API5L ISO 9001:2008 TUV SGS BV etc
Outside Diameter
1/2'--24'
21.3mm-609.6mm
Thickness
SCH5S, SCH10S, SCH20S,SCH20, SCH30,STD, SCH40,
SCH60, SCH80, SCH100, SCH140, SCH160,XS,
1.65mm-59.54mm
Length
5.8m 6m Fixed, 12m Fixed, 2-12m Random.
Technic
1/2'--6': hot piercing processing technic
6'--24' :hot extrusion processing technic
Surface Treatment
Black Painted, Galvanized, Natural, Anticorrosive 3PE coated,polyurethane foam Insulation .
Packing
Bundles or In bulk. bundled pipes with two slings at the both
end for easy loading and discharging,
End
Bevel end(>2"), Plain (≤2"),with plastic cap, with screwed and
socket.
Usage /Application
Oil pipe line, Drill pipe, Hydraulic pipe, Gas pipe, Fluid pipe,
Boiler pipe,Conduit pipe, Scaffolding pipe pharmaceutical and
ship building etc.
We are seamless steel pipe manufacturer. especially produces welded steel pipes of large diameter and thick wall thickness in ERW, LSAW and SSAW. Anti-corrosion layers can also be done in our factory. Seamless steel pipe is a kind of circular, square and rectangular steel with hollow...
Chat NowWe are seamless steel pipe manufacturer. especially produces welded steel pipes of large diameter and thick wall thickness in ERW, LSAW and SSAW. Anti-corrosion layers can also be done in our factory.
Seamless steel pipe is a kind of circular, square and rectangular steel with hollow section and no joints around. Seamless steel tube is made of steel ingot or solid tube blank by piercing and then by hot rolling, cold rolling or cold drawing.
Product Specification
Shape | Round |
Material Grade | SS316, SS316L, ASTM A240 |
Surface Finish | Anodized, Mill Finished, Finished Polished |
Pipe Fluid | Chemical, Gas, Water |
Alloy Or Not | Iss Alloy |
Certification | API |
Surface Treatment | Galvanized |
Tensile Strength (Mpa) | 450 |
Min Wall Thickness | 0.16 inches |
Max Wall Thickness | 0.50 inches |
Min Outer Dimensions | 3 inches |
Max Outer Dimensions | 10 inches |
Withstand Pressures | Up to 200 bar (2900 psi) |
Minimum Order Quantity | 2 Ton |
API 5L A106/A53 Gr. B A179/A192 X42 X52 St37 S52 Seamless Steel Pipe (Pipeline Pipe)
Standard | API A106 GR.B A53 Gr.B seamless steel pipe /ASTM A106 Gr.B A53 Gr.B steel tube AP175-79, DIN2I5L ,ASTM A106 Gr.B, ASTM A53 Gr.B, ASTM A179/A192/A213/A210 /370WP91, WP11,WP22. DIN17440, DIN2448,JISG3452-54. |
Material | API5L,Gr.A&B, X42, X46, X52, X56, X60, X65, X70, X80, ASTM A53Gr.A&B,ASTM A106 Gr.A&B, ASTM A135, ASTM A252, ASTM A500, DIN1626, ISO559, ISO3183.1/2, KS4602, GB/T911.1/2,SY/T5037, SY/T5040 STP410,STP42. |
Certificates | API5L ISO 9001:2008 TUV SGS BV etc |
Outside Diameter | 1/2'--24' |
21.3mm-609.6mm | |
Thickness | SCH5S, SCH10S, SCH20S,SCH20, SCH30,STD, SCH40, SCH60, SCH80, SCH100, SCH140, SCH160,XS, |
1.65mm-59.54mm | |
Length | 5.8m 6m Fixed, 12m Fixed, 2-12m Random. |
Technic | 1/2'--6': hot piercing processing technic |
6'--24' :hot extrusion processing technic | |
Surface Treatment | Black Painted, Galvanized, Natural, Anticorrosive 3PE coated,polyurethane foam Insulation . |
Packing | Bundles or In bulk. bundled pipes with two slings at the both end for easy loading and discharging, |
End | Bevel end(>2"), Plain (≤2"),with plastic cap, with screwed and socket. |
Usage /Application | Oil pipe line, Drill pipe, Hydraulic pipe, Gas pipe, Fluid pipe, Boiler pipe,Conduit pipe, Scaffolding pipe pharmaceutical and ship building etc. |
We are seamless steel pipe manufacturer. especially produces welded steel pipes of large diameter and thick wall thickness in ERW, LSAW and SSAW. Anti-corrosion layers can also be done in our factory. Seamless steel pipe is a kind of circular, square and rectangular steel with hollow...
Chat NowWe are seamless steel pipe manufacturer. especially produces welded steel pipes of large diameter and thick wall thickness in ERW, LSAW and SSAW. Anti-corrosion layers can also be done in our factory.
Seamless steel pipe is a kind of circular, square and rectangular steel with hollow section and no joints around. Seamless steel tube is made of steel ingot or solid tube blank by piercing and then by hot rolling, cold rolling or cold drawing.
Product Specification
Shape | Round |
Material Grade | SS316, SS316L, ASTM A240 |
Surface Finish | Anodized, Mill Finished, Finished Polished |
Pipe Fluid | Chemical, Gas, Water |
Alloy Or Not | Iss Alloy |
Certification | API |
Surface Treatment | Galvanized |
Tensile Strength (Mpa) | 450 |
Min Wall Thickness | 0.16 inches |
Max Wall Thickness | 0.50 inches |
Min Outer Dimensions | 3 inches |
Max Outer Dimensions | 10 inches |
Withstand Pressures | Up to 200 bar (2900 psi) |
Minimum Order Quantity | 2 Ton |
Product Specification Product Description We are one of the prominent manufacturer, trader, Supplier and exporter of Seamless Pipe. Our pipe also consists of other alloying elements like manganese, silicon and copper in negligible quantities. These also oiled and black painted to prevent...
Chat Now Product Specification
Length | 6m, 12m, 18m |
Shape | Round |
Color | Black |
Surface Finish | Brushed |
Outside Diameter | 21.3 - 219.1 mm |
Thickness | 1 mm - 6mm |
Product Description
We are one of the prominent manufacturer, trader, Supplier and exporter of Seamless Pipe. Our pipe also consists of other alloying elements like manganese, silicon and copper in negligible quantities. These also oiled and black painted to prevent rusting. Further, we can customize them as per requirements of the clients and at the very decent price range.
Features:
Corrosion resistance
Dimensional accuracy
Free from leakage
Durability
If you're satisfied with our 1 1/2 inch seamless pipe, welcome to place orders with us. As one of the best Seamless Steel Pipe manufacturers and suppliers in China, we have bulk hot sale products in stock at your choice. For detailed chemical composition and free sample, contact our factory now. Competitive price and good service are offered. Hot Tags: 1 1/2 inch seamless pipe, China, factory, suppliers, manufacturers, price, bulk, in stock, chemical composition, hot sale, free samplesp.infoASTM A312 ss304/ss 316L hot rolled low price seamless stainless steel pipe
| Commodity | ASTM A312 ss304/ss 316L hot rolled low price seamless stainless steel pipe |
| Material | TP304, 304L, 304H, 316, 316L, 321, 321H, 310S 317L, 347H, 31803, etc. |
| Standard | ASTM A53, ASTM A106/ASME SA106/ASTM A53/ASME SA53/ API 5L GR. B PSL 1, ASTM A500, JIS G3444, G3445, G3452, G3454, ETC... |
| Grade | 300 series |
| Size | OD 6mm-530mm WT: 1.00mm-20mm |
| Length | 4000-13000mm |
| Surface | Annealed/manual polished/mechanical polished |
| Process method | Cold drawn, Cold-rolling |
| Application | Used in petroleum chemical, metallurgy, paper making, food, shipbuilding, environmental |
| Packing Details | In Bundles, in Bunk or as Your Requirements |
| Delivery time | Within 20-30 days after received down payment |
| Payment Terms | L/C T/T |
| Shipment Terms | FOB CFR CIF |
| MOQ | 5 tons |
| Origin | China (Mainland) |
| NOTE | Please feel free to contact us, we will do our best to provide best value products and services of the highest quality to you. |
Images of Seamless Steel Pipe P265GH Tube
imagesEN 10216-2 Grade P265GH Alloy Steel Seamless Tubes The number 235 simply states the minimum yield strength of the en 10216-2 p265gh in N/mm2.These steel grades are available in two qualities TR 1 TR 2.Steel tubes intended for use in ambient temperature settings are referred to as en 10216-2 p235gh tc1 quality.Generally steel pipes belonging to quality TR 1 are a part of systems that are useful to ferry across media.sp.info
STAINLESS STEEL 310/310S PIPES SPECIFICATIONS Standard specifications for stainless steel 310/310S Pipes. If any specification is not mentioned here, you can contact us. We also manufacture and export any custom specification as per clients requirement. TYPES OF SS 310/310S PIPES
Chat NowSTAINLESS STEEL 310/310S PIPES SPECIFICATIONS
Standard specifications for stainless steel 310/310S Pipes. If any specification is not mentioned here, you can contact us. We also manufacture and export any custom specification as per clients requirement.
Specifications | ASTM A 312 ASME SA 312 / ASTM A 358 ASME SA 358 |
Dimensions | ASTM, ASME, and API |
SS Pipes | 1/2″ NB – 16″ NB |
ERW Pipes | 1/2″ NB – 24″ NB |
EFW Pipes | 6″ NB – 100″ NB |
Size | 1/8″NB TO 30″NB IN |
Specialized in | Large Diameter Size |
Schedule | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
Type | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
Form | Round, Square, Rectangular, Hydraulic Etc |
Length | Single Random, Double Random & Cut Length |
End | Plain End, Beveled End, Treaded |
TYPES OF SS 310/310S PIPES
310 Seamless Pipe | GOST 20Ch23N18 Seamless Pipe |
UNS S31008 Seamless Pipe | SS 310 ERW Pipe |
Stainless Steel 310S EFW Pipe | 310 SS Welded Pipe |
310S Stainless Steel Welded Pipe | UNS S31000 Round Pipe |
WERKSTOFF NR. 1.4841 Square Pipe | ASTM A312 TP 310 – 310S Stainless Steel Round Pipes |
SS 310 Square Pipe | 310S Stainless Steel Square Pipe |
UNS S31008 Rectangular Pipe | ASTM A312 TP 310S Stainless Steel Custom Pipes |
310 SS Custom Pipe | SS 310 Polished Pipe |
310S Stainless Steel Polished Pipe | WERKSTOFF NR. 1.4841 Decorative Pipe |
UNS S31000 Thick Wall Pipe | 310S Decorative Pipe |
SS 310 Thick Wall Pipe | 310S Thin Wall Pipe |
Stainless Steel 310 Electropolished Pipe | ASTM A312 TP 310S Stainless Steel Electropolished Pipes |
Sizes: Maximum diameter: 36" (914.4mm) minimum diameter: 1/2" (21.3mm) Maximum thickness: 60mm mininmum thickness: 2.11mm SCH: SCH10,SCH20,STD,SCH40,SCH60,XS,SCH80,SCH100,SCH120,SCH160,XXS Uses: Coating Standard of carbon seamless steel pipe Chemical components & mechanical...
Chat Now Sizes:
Maximum diameter: 36" (914.4mm) minimum diameter: 1/2" (21.3mm)
Maximum thickness: 60mm mininmum thickness: 2.11mm
SCH: SCH10,SCH20,STD,SCH40,SCH60,XS,SCH80,SCH100,SCH120,SCH160,XXS
Uses:
Maximum thickness: 60mm mininmum thickness: 2.11mm
| Chilled water pipe | Steam/condensate pipe | Heat exchanger pipe | Marine/offshore pipe | Dredging pipe | Industrial pipe |
| Oil and gas pipe | Fire fighting pipe | Construction/structure pipe | Irrigation pipe | Drain/sewage pipe | Boiler tube |
Coating
| 3PE Coating | 3PP Coating | FBE Coating | Epoxy Coating | Special Painting |
Standard of carbon seamless steel pipe
| ASTM A53 Gr.B | Black and hot-dipped zinc-coated steel pipes welded and seamless |
| ASTM A106 Gr.B | Seamless carbon steel for high temperature service |
| ASTM SA179 | Seamless cold-drawn low-carbon steel heat exchanger and condenser tubes |
| ASTM SA192 | Seamless carbon steel boiler tubes for high pressure |
| ASTM SA210 | Seamless Medium-carbon boiler and superheater tubes |
| ASTM A213 | Seamless alloy-steel boiler, superheater, and heat-exchanger tubes |
| ASTM A333 GR.6 | seamless and welded carbon and alloy steel pipe intended for use at low temperatures. |
| ASTM A335 P9,P11,T22,T91 | Seamless ferritic alloy-steel pipe for high-temperature service |
| ASTM A336 | Alloy steel forgings for pressure and high-temperature parts |
| ASTM SA519 4140/4130 | Seamless carbon for mechanical tubing |
| API Spec 5CT J55/K55/N80/L80/P110/K55 | Seamless steel pipe for casing |
| API Spec 5L PSL1/PSL2 Gr.b, X42/46/52/56/65/70 | Seamless steel pipe for line pipe |
| DIN 17175 | Seamless steel tube for elevated temperture |
| DN2391 | Cold drawn seamless prevision pipe |
| DIN 1629 | Seamless circular unalloyed steel tubes subject to special requirements |
Chemical components & mechanical properties
| Standard | Grade | Chemical Components (%) | Mechanical Properties | |||||
| ASTM A53 | C | Si | Mn | P | S | Tensile STrength(Mpa) | Yield STrength(Mpa) | |
| A | ≤0.25 | - | ≤0.95 | ≤0.05 | ≤0.06 | ≥330 | ≥205 | |
| B | ≤0.30 | - | ≤1.2 | ≤0.05 | ≤0.06 | ≥415 | ≥240 | |
| ASTM A106 | A | ≤0.30 | ≥0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≥415 | ≥240 |
| B | ≤0.35 | ≥0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≥485 | ≥275 | |
| ASTM SA179 | A179 | 0.06-0.18 | - | 0.27-0.63 | ≤0.035 | ≤0.035 | ≥325 | ≥180 |
| ASTM SA192 | A192 | 0.06-0.18 | ≤0.25 | 0.27-0.63 | ≤0.035 | ≤0.035 | ≥325 | ≥180 |
| API 5L PSL1 | A | 0.22 | - | 0.90 | 0.030 | 0.030 | ≥331 | ≥207 |
| B | 0.28 | - | 1.20 | 0.030 | 0.030 | ≥414 | ≥241 | |
| X42 | 0.28 | - | 1.30 | 0.030 | 0.030 | ≥414 | ≥290 | |
| X46 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥434 | ≥317 | |
| X52 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥455 | ≥359 | |
| X56 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥490 | ≥386 | |
| X60 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥517 | ≥448 | |
| X65 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥531 | ≥448 | |
| X70 | 0.28 | - | 1.40 | 0.030 | 0.030 | ≥565 | ≥483 | |
| API 5L PSL2 | B | 0.24 | - | 1.20 | 0.025 | 0.015 | ≥414 | ≥241 |
| X42 | 0.24 | - | 1.30 | 0.025 | 0.015 | ≥414 | ≥290 | |
| X46 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥434 | ≥317 | |
| X52 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥455 | ≥359 | |
| X56 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥490 | ≥386 | |
| X60 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥517 | ≥414 | |
| X65 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥531 | ≥448 | |
| X70 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥565 | ≥483 | |
| X80 | 0.24 | - | 1.40 | 0.025 | 0.015 | ≥621 | ≥552 |
Classfication of carbon seamless steel pipe
| Types | Application |
| Structure Purposes | General structure and mechanical |
| Liquid Services | Petroleum, gas and other fluids conveying |
| Low and Medium Pressure Boiler Tube | Steam and boiler manufacturing |
| Hydraulic Pillar Service | Hydraulic support |
| Auto Semi-shaft Casing | Auto sem-shaft casing |
| Line Pipe | Oil and gas conveying |
| Tubing and Casing | Oil and gas conveying |
| Drill Pipes | Well drilling |
| Geological Drilling Pipe | Geological drilling |
| Furnace tubes, heat exchangers tubes | Furnace tubes, heat exchangers |
Tolerances of carbon seamless steel pipe
| Pipe types | Pipe sizes(mm) | Tolerances |
| Hot rolled | OD<50 | ±0.50mm |
| OD≥50 | ±1% | |
| WT<4 | ±12.5% | |
| WT 4～20 | +15%, -12.5% | |
| WT>20 | ±12.5% | |
| Cold drawn | OD 6～10 | ±0.20mm |
| OD 10～30 | ±0.40mm | |
| OD 30～50 | ±0.45 | |
| OD>50 | ±1% | |
| WT≤1 | ±0.15mm | |
| WT 1～3 | +15%, -10% | |
| WT >3 | +12.5%, -10% |
Carbon seamless steel pipe is a kind of strip steel. Steel pipe with hollow cross-section, a large number of pipes used to transport fluid, such as the transportation of oil, natural gas, gas, water and some solid materials such as pipes. Steel and round steel and other solid steel compared to the same bending strength in the same bending, lighter weight, is an economic section of steel, is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipe, Bicycle frames and steel construction scaffolding. The use of carbon seamless steel pipe manufacturing ring parts can improve material utilization, simplify the manufacturing process, save materials and processing time, such as rolling bearing rings, jackets, etc., has been widely used to manufacture steel pipe.
ASTM A213 / ASME SA213 T91 Alloy Steel Seamless Tube These ASTM A213 / ASME SA213 T91 Alloy Steel SMLS Tubes/Pipes are widely used in various application industry such as Oil & Gas, Power, Fertilizers, Heat-Exchangers, Paper & Pulp, pharmaceuticals, Chemicals, Water Treatment, Dairy etc....
Chat NowASTM A213 / ASME SA213 T91 Alloy Steel Seamless Tube
These ASTM A213 / ASME SA213 T91 Alloy Steel SMLS Tubes/Pipes are widely used in various application industry such as Oil & Gas, Power, Fertilizers, Heat-Exchangers, Paper & Pulp, pharmaceuticals, Chemicals, Water Treatment, Dairy etc. We are Offered at competitive prices for ASTM A213 / ASME SA213 T91 Alloy Steel Seamless Tubes/Pipes in the Global market.
Outside Diameter & Tolerance:
Hot rolled | Outside Diameter, mm | Tolerance, mm |
OD≤101.6 | +0.4/-0.8 | |
101.6＜OD≤190.5 | +0.4/-1.2 | |
190.5＜OD≤228.6 | +0.4/-1.6 | |
Cold Drawn | Outside Diameter, mm | Tolerance, mm |
OD＜25.4 | ±0.10 | |
25.4≤OD≤38.1 | ±0.15 | |
38.1＜OD＜50.8 | ±0.20 | |
50.8≤OD＜63.5 | ±0.25 | |
63.5≤OD＜76.2 | ±0.30 | |
76.2≤OD≤101.6 | ±0.38 | |
101.6＜OD≤190.5 | +0.38/-0.64 | |
190.5＜OD≤228.6 | +0.38/-1.14 |
Product Specification Stainless Steel Pipes Grade ASTM A312 TP 304 Stainless Steel Pipe ASME SA312 TP 304 Stainless Steel Pipe ASTM A312 TP 304L Stainless Steel Pipe ASME SA312 TP 304L Stainless Steel Pipe ASTM A312 TP 309 Stainless Steel Pipe ASME SA312 TP 309 Stainless Steel Pipe ASTM A312 TP...
Chat Now Product Specification
Material Grade | SS316, SS316L, SS304, SS204 |
Size (inch) | 1/2, 3/4, 1, 2, 3, >3 |
Unit Pipe Length | 3 meter, 6 meter, 9 meter, 18 meter, Customized |
Single Piece Length | 6 meter, 18 meter, 36 meter, >36 meter, 3 meter |
Pipe Fluid | Chemical, Water, Steam, Gas, Slurry |
Surface Finish | Sand Blasted, Mill Finished, Finished Polished, Anodized, Brushed |
Type | Welded, Seamless |
Material | Stainless Steel |
Corrosion Resistant | Yes |
Unit Length | 3 m, 6 m, 12 m, 18 m, Or As Per Requirement |
Size/Diameter | 1/8 inch, 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch |
Is It Corrosion Resistant | Corrosion Resistant |
Is It Customized | Customised |
Condition | New |
Application | Gas Handling,Utilities Water,Food Products,Drinking Water,Chemical Handling |
Stainless Steel Pipes Grade
ASTM A312 TP 304 Stainless Steel Pipe
ASME SA312 TP 304 Stainless Steel Pipe
ASTM A312 TP 304L Stainless Steel Pipe
ASME SA312 TP 304L Stainless Steel Pipe
ASTM A312 TP 309 Stainless Steel Pipe
ASME SA312 TP 309 Stainless Steel Pipe
ASTM A312 TP 310 Stainless Steel Pipe
ASME SA312 TP 310 Stainless Steel Pipe
ASTM A312 TP 316 Stainless Steel Pipe
ASME SA312 TP 316 Stainless Steel Pipe
ASTM A312 TP 316L Stainless Steel Pipe
ASME SA312 TP 316L Stainless Steel Pipe
ASTM A312 TP 316H Stainless Steel Pipe
ASME SA312 TP 316H Stainless Steel Pipe
ASTM A312 TP 316 Ti Stainless Steel Pipe
ASME SA312 TP 316 Ti Stainless Steel Pipe
ASTM A312 TP 321 Stainless Steel Pipe
ASME SA312 TP 321 Stainless Steel Pipe
Stainless Steel Pipes Applications
Waters Pipes
Steel Casing Pipes
Sewage Pipes
Structural Steel Pipes
Industrial Steel Pipes
Oil & Gas Pipes
If you're satisfied with our 1/8 inch stainless steel pipes, welcome to place orders with us. As one of the best Stainless Pipes manufacturers and suppliers in China, we have bulk hot sale products in stock at your choice. For detailed chemical composition and free sample, contact our factory now. Competitive price and good service are offered. Hot Tags: 1/8 inch stainless steel pipes, China, factory, suppliers, manufacturers, price, bulk, in stock, chemical composition, hot sale, free samplesp.infoImages of ISO Certificated Seamless Steel Gas Pipe For Gas Trimagesseamless steel line pipeLine Steel Pipe.Product categories:Seamless Steel Pipe Product display:API 5L Line Pipe,Seamless Steel Tube,seamless steel line pipe Product description:API 5L pipe,Oil and Gas Line Pipe,Seamless Steel Tube,Pressure Tube,Line Steel Pipe,Steel Pipeline
Read More
USAGE Seamless steel pipe often could be formed and produced through hot rolled craft and cold drawn technology. Certainly the strength of hot rolled seamless steel pipes rather than cold drawn seamless steel tubes. About its common uses respectively are Steam pipeline, Gas pipeline, Liquefied...
Chat Now USAGE
Seamless steel pipe often could be formed and produced through hot rolled craft and cold drawn technology. Certainly the strength of hot rolled seamless steel pipes rather than cold drawn seamless steel tubes. About its common uses respectively are
Steam pipeline,
Gas pipeline,
Liquefied gas pipeline,
Natural gas pipelines,
All kinds of pipelines for petroleum products,
Pipelines for conveying various other gases or liquids.
Seamless Steel Pipe Description Detail | |||
Product Description | Caron & Low Alloy Seamless Steel Pipe | ||
Advantaged Product Specification | |||
English | Chinese | ||
Outside Diameter (Inch) | Wall thickness(Inch) | Outside Diameter (mm) | Wall thickness (mm) |
From 1/2 to 5 | From SCH40 to XXS | From 25 to 140 | From4 to 36 |
Length | From 2m to 12.5m in accordance with customers' requirements | ||
Material & Standard Description | Chisese | American | German |
10# | ASTM A53-A | St37 DIN1626 | |
ASTM A106-A | St37-2 DIN17175 | ||
ASTM A179-C | St35.8 DIN17175 | ||
ASTM A192 | St35.8 DIN17175 | ||
20# | ASTM A53-B | St42-2 DIN1626 | |
ASTM A106-B | St45-8 DIN17175 | ||
ASTM A178-C | St45-4 DIN1629 | ||
45# | ASTM A1045 | CK45 | |
16Mn | ASTM A210-C | St52 DIN1629 | |
37Mn5 | J55 | ||
27SiMn | |||
CrMo | ASTM 4135,4150 | CrMo4 DIN17212 | |
40Cr | ASTM 5140 | 41Cr4 |
Plastic Carbon Steel Pipe SCH40 Aisi 1018 Steel Tube ₹43,624.96-₹50,753.22 / Ton High Quality AISI 1018 Seamless Carbon Steel Pipe With Good Price ₹35,641.30-₹71,282.60 / Metric Ton Direct price aisi 1018 seamless carbon steel pipe for building ₹46,333.69-₹60,590.21 / Ton p235 tr 1 aisi 1018 seamless steel
Read More
Images of Seamless Steel Pipe Polyethylene
imagesCheap Seamless Steel Pipe,China Steel Pipes3lpe coating seamless steel pipes Structral Steel Pipe Mechanical seamless steel pipe OCTG seamless steel pipes PE100 HDPE pipes DIN 30670 API 5L X42 PE WELD PIPE EFW steel tube Hollow section for export Q235 material square steel tube Carbon steel seamless elbow for expo high quality stainless steel cap API line pipe used in natural gas tr GBTsp.info
Welded pipe starts off as flat ribbon that is then rolled into a cylindrical shape. The seam is then welded shut using either Metal Inert Gas welding or Tungsten Inert Gas welding. The pipe is usually not re-sized. Welded pipe is structually weaker than Seamless pipe. Seamless pipe is made by...
Chat NowWelded pipe starts off as flat ribbon that is then rolled into a cylindrical shape. The seam is then welded shut using either Metal Inert Gas welding or Tungsten Inert Gas welding. The pipe is usually not re-sized. Welded pipe is structually weaker than Seamless pipe.
Seamless pipe is made by extruding the metal over a mandrel and resizing thru a set of dies to achieve the outer diameter and wall thickness desired. Seamless pipe usually has a higher pressure rating than welded pipe due to the fewer irregularities in the pipe wall.
Large Diameter Welded Pipe Specification
Specifications | ASTM A 312 / A 213 / A 249 / A 269 / A 268 / A 358 |
Grades | 304 , 316 , 309S , 310 , 310S & 308 |
Diameter | 1/4” NB to 24” NB & 1/4” OD to 6” OD |
Thickness | SCH 5, SCH 10, SCH 40, SCH 80, SCH 160, SCH XXS & 10 SWG, 12 SWG, 14 SWG , 16 SWG, 18 SWG, 19 SWG, 20 SWG, 22 SWG |
Length | Standard 6 Meter & Cut to Length Size |
Value Added Services | Customize Length, Bending, Annealing, Pickling, Polishing. |
API 5L X56 PSL 2 Pipe The API 5L steel is a standard quality material for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements. Carbon Steel API 5L X56 PSL 2 Pipes of American Petroleum Institute specification covers seamless and welded steel line...
Chat Now API 5L X56 PSL 2 Pipe
The API 5L steel is a standard quality material for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements. Carbon Steel API 5L X56 PSL 2 Pipes of American Petroleum Institute specification covers seamless and welded steel line pipe. We offer carbon steel pipes in customized size range and specification as per customer requirements.
API 5L X56 PSL 2 Carbon Steel Pipe Specifications
Standard | ASTM A53 GR. A/B/C, A106, A179, A530, A530M, A671, A672 |
Dimensions | All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, API. |
API 5L X56 ERW Pipe Size | 1/2″ NB – 24″ NB |
API 5L X56 SAW/LSAW Pipe Size | 16″ NB – 100″ NB |
API 5L X56 Seamless Pipe Size | 1/2″ NB – 60″ NB |
Type | Seamless / ERW / Welded / Fabricated / EFW |
Form | Round, Square, Rectangular, Hydraulic Etc |
Sizes LSAW/DSAW | 16’OD TO 54′ OD (8 MM TO 50 MM THK) |
Wall Thickness | SCH10,SCH20,SCH30,STD,SCH40,SCH60,XS,SCH80,SCH100,SCH120,SCH140,SCH160,XXS DIN, JIS standard thickness |
Types of API 5L X56 PSL 2 CS Pipe
API 5L X56 PSL 2 Seamless Pipe | API 5L X56 PSL 2 Welded Pipe |
API 5L X56 Carbon Steel PSL 2 Seamless Pipe | API 5L X56 Carbon Steel PSL 2 Welded Pipe |
PSL 2 API 5L X56 Seamless Line Pipe | PSL 2 API 5L X56 Welded Line Pipe |
API 5L X56 PSL 2 ERW Pipe | API 5L X56 PSL 2 EFW Pipe |
API 5L X56 Carbon Steel PSL 2 ERW Pipe | API 5L X56 Carbon Steel PSL 2 EFW Pipe |
PSL 2 API 5L X56 ERW Line Pipe | PSL 2 API 5L X56 EFW Line Pipe |
API 5L X56 PSL 2 Fabricated Pipe | API 5L X56 PSL 2 Hollow Pipe |
API 5L X56 Carbon Steel PSL 2 Fabricated Pipe | API 5L X56 Carbon Steel PSL 2 Hollow Pipe |
PSL 2 API 5L X56 Fabricated Line Pipe | PSL 2 API 5L X56 Hollow Line Pipe |
API 5L X56 PSL 2 Electropolish Pipe | API 5L X56 PSL 2 Square Pipe |
API 5L X56 Carbon Steel PSL 2 Electropolish Pipe | API 5L X56 Carbon Steel PSL 2 Square Pipe |
PSL 2 API 5L X56 Electropolish Line Pipe | PSL 2 API 5L X56 Square Line Pipe |
API 5L X56 Carbon Steel PSL 2 Bush Pipe | PSL 2 API 5L X56 Bush Line Pipe |
API 5L X56 PSL 2 Round Pipe | API 5L X56 PSL 2 Rectangular Pipe |
API 5L X56 Carbon Steel PSL 2 Round Pipe | API 5L X56 Carbon Steel PSL 2 Rectangular Pipe |
PSL 2 API 5L X56 Round Line Pipe | PSL 2 API 5L X56 Rectangular Line Pipe |
API 5L X56 PSL 2 Carbon Steel Pipe - Industries & Applications
Our pipes and tubes are used in a wide range of applications and various industries. Below are a few of them:
Gas Processing Industries
Petrochemical Industries
Power Generation Industries
Food Processing Industries
Chemical Industries
Oil & Gas Industries
Fertilizers Industries
Sugar Industries
If you're satisfied with our psl2-smls-steel-pipe, welcome to place orders with us. As one of the best Seamless Steel Pipe manufacturers and suppliers in China, we have bulk hot sale products in stock at your choice. For detailed chemical composition and free sample, contact our factory now. Competitive price and good service are offered. Hot Tags: psl2-smls-steel-pipe, China, factory, suppliers, manufacturers, price, bulk, in stock, chemical composition, hot sale, free samplesp.infoImages of GB T 18248 35crmo Structural Hollow Sections
imagesgb t 18248 34crmo4 high temperature pipe - API Steel Pipe gb t 18248 34crmo4 hollow section - utopiacourant.nl.gb/t 18248 seamless steel pipe gb/t 18248 30crmo pipe gb/t 18248 34mn2v seamless steel pipe gb/t 18248 35crmo seamless steel pipe gb/t 18248 34crmo4 seamless steel pipe astm a106/astm a53/api 5l 3pe coating tr
Read More
API 5L SEAMLESS & WELDED PIPE American Piping Products stocks API 5L pipe in grades B and X42 – X120. Scope ANSI / API 5L specifies the manufacture of two product levels (PSL1 and PSL2) of seamless and welded steel pipe for the use of a pipeline in the transportation of petroleum and natural...
Chat Now
API 5L SEAMLESS & WELDED PIPE
American Piping Products stocks API 5L pipe in grades B and X42 – X120.
Scope
ANSI / API 5L specifies the manufacture of two product levels (PSL1 and PSL2) of seamless and welded steel pipe for the use of a pipeline in the transportation of petroleum and natural gas.
Typical process of manufacturing
Type of Pipe | PSL 1 | PSL 2 | |||
Grade A | Grade B | X42 to X70 | B to X80 | X80 to X100 | |
SMLS | ü | ü | ü | ü | ü |
LFW | ü | ü | ü | ||
HFW | ü | ü | ü | ü | |
LW | ü | ||||
SAWL | ü | ü | ü | ü | ü |
SAWH | ü | ü | ü | ü | ü |
SMLS – Seamless, without weld LFW – Low frequency welded pipe, <70 kHz HFW – High frequency welded pipe, >70 kHz SAWL – Submerge-arc welding longitudinal welded SAWH - Submerge-arc welding helical welded |
316 STAINLESS STEEL BUTT WELD PIPE FITTINGS Specification of 316 Stainless Steel Butt weld Pipe Fittings Dimensions: ANSI/ASME B16.9, ANSI/ASME B16.28, MSS-SP-43 Size: 1/2" NB TO 48" NB Standard: ASTM A403 / ASME SA403 Form: Elbow, Tee, Reducing Tee, Full Coupling, Long Stub Bend,...
Chat Now316 STAINLESS STEEL BUTT WELD PIPE FITTINGS
Specification of 316 Stainless Steel Butt weld Pipe Fittings
Dimensions:ANSI/ASME B16.9, ANSI/ASME B16.28, MSS-SP-43
Size:1/2" NB TO 48" NB
Standard:ASTM A403 / ASME SA403
Form:Elbow, Tee, Reducing Tee, Full Coupling, Long Stub Bend, Short Stub Bend, Half Coupling, Reducer, Plug, Union, Pipe Cap, Return Bends, Collar etc.
Bending Radius:R= 1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Type:Seamless Pipe Fittings, Welded Pipe Fittings, Fabricated Butt weld Pipe Fittings
Grade:WP 316 Stainless Steel / UNS S31600 Stainless Steel
Thickness:5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS
| Standard | Stainless Steel 316 |
| Werkstoff Nr. | 1.4401 / 1.4436 |
| UNS No | S31600 |
| JIS | SUS 316 |
| AFNOR | Z7CND17‐11‐02 |
| BS | 316S31 / 316S33 |
| GOST | - |
| EN | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
Available Types of UNS S31600 Stainless Steel Pipe Fittings / SS 316 Fittings:
| Stainless WP 316 Seamless Fittings | 316 Steel Pipe Fittings | Stainless 316 Fittings Tee |
| UNS S31600 Steel Pipe Fittings | Steel WP 316 Long Radius Elbow | 316 Stainless Steel Pipe Reducer |
| SS WP 316 Pipe Fittings | 316 Butt weld Pipe Fittings | Steel 316 Pipe Fittings Elbow |
| S31600 Butt weld Fittings | A403 Steel 316 Pipe Cap | Steel 316 Fittings Coupling |
| SS 316 Welded Pipe Fittings | Stainless Steel 316 Elbow | WP 316 Steel Seamless Tee |
| Stainless Steel 316 Fittings | WP 316 Steel Seamless Fittings | S31600 Welded Butt weld Fittings |
| WP 316 Steel Concentric Reducer | SS 316 Reducing Cross | WP 316 Steel Eccentric Reducer |
| SS WP 316 Fabricated Tee | ASTM A403 WP 316 Steel 5D Elbow | Steel 316 Short Radius Elbow |
- Alloy Steel Plate
- Automobile Structure Steel Plate
- Boiler and Pressure vessel steel plate
- Carbon and Low alloy High strength Steel Plate
- Clad Steel Plate
- Cold Rolled Steel Coil
- Gas Cylinder Steel coil
- Pipeline steel plate
- Steel Pipe